[time-nuts] Wenzel 100 MHz Oscillators (w/ EFC) available

Jim Sanford wb4gcs at wb4gcs.org
Fri Dec 5 18:09:31 EST 2014


Skip:
I would like one, if you have any left.
How do I pay?
Thanks,
Jim
wb4gcs at amsat.org

On 12/5/2014 1:00 PM, Skip Withrow wrote:
> Hello time-nuts,
>
> Please excuse the blatantly commercial announcement, I generally keep
> business matters off the list, but I have some Wenzel oscillators that may
> be of interest to time-nuts and wanted to give you first crack at them.
>
> These are Wenzel 500-06769 units, custom number for Harris used in
> microwave radios.  Output is 100MHz at +20dBm.  Supply input is +12 volts
> DC (about 500mA at start).  EFC runs between 0.5V and 4.5V with positive
> coefficient and is about 335Hz/V.
>
> Unit is in standard 2" x 2" x .75" package.  Output connector is female SMA.
>
> These would make great units for synthesizer and DDS projects.  I don't
> have the ability to measure the phase noise, but should be relatively good
> as they were used at microwave frequencies in their past life.
>
> I'm asking $50 each for them and $7 (any quantity) Priority Mail shipping
> to U.S. addresses only.  If you would like one (or more) please PayPal to
> paypal at rdrelectronics.com.  I have attached a picture of one unit with the
> pinout.
>
> Regards,
> Skip Withrow
> RDR Electronics, Inc.
> 303-790-1830 8am-5pm M-F
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.



---
This email has been checked for viruses by Avast antivirus software.
http://www.avast.com


More information about the time-nuts mailing list