[time-nuts] PRS-45A is alive!
EWKehren at aol.com
EWKehren at aol.com
Tue Dec 9 09:20:27 EST 2014
16 Minutes is normal. First FTS tubes do not leak as much as the old HP
tubes. Second the seller most likely did run a test which means the tube was
pumped down.
Unless there is software that tells beam current the only way I know to get
some idea of health of tube is as I mentioned before measure the beam
current. I have probably done it at least a hundred times, made a connector
adapter.
Bert Kehren
In a message dated 12/8/2014 10:15:08 P.M. Eastern Standard Time,
bob at evoria.net writes:
Well, it's alive, and I even have 10MHz coming from it. It took about 16
minutes to go to lock. Is that good, or doesn't matter? Now I've got to
put together a serial cable and see if I can talk to it and find out how it
thinks it's doing. But, this is good!
www.evoria.net/AE6RV/PRS-45A/2014-12-08%2020.51.33.jpg
Hope you enjoy the wall decorations. =)
Bob - AE6RV
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts
mailing list