[time-nuts] Linear voltage regulator hints...

Richard (Rick) Karlquist richard at karlquist.com
Tue Dec 9 11:22:07 EST 2014


I don't remember, but it wasn't a 723.

Rick

On 12/8/2014 7:35 PM, Brooke Clarke wrote:
> Hi Rich:
>
> Did you use the 723 or . . . .?
> As far as I know the 723 is supposed to have low noise.
>
> Mail_Attachment --
> Have Fun,
>
> Brooke Clarke
> http://www.PRC68.com
> http://www.end2partygovernment.com/2012Issues.html
> http://www.prc68.com/I/DietNutrition.html
> Richard (Rick) Karlquist wrote:
>>
>>
>> On 12/8/2014 4:53 PM, Bert Kehren via time-nuts wrote:
>>> We solved that problem by attaching the regulators to the FRK back plate
>>> which is with fan control is kept within 0.01C. We did not do it for
>>> that
>>> purpose but found that we needed some more heat in order to keep the
>>> fan in an
>>>   optimum fan speed. Rb, OCXO and Fan power transistor are on the back
>>> plate.  Works for us.
>>> Bert Kehren
>>>
>>
>> When I designed the E1938A, I chose a reasonable looking voltage
>> reference IC and put it inside the oven.  I figured that was
>> the end of it as far as tempco was concerned.  It was, but it
>> turned out that the *noise* of the reference was unacceptable
>> and of course the oven does nothing to fix that.  I had to
>> switch to a lower noise reference.
>>
>> Rick Karlquist N6RK
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>


More information about the time-nuts mailing list