[time-nuts] WTB WECO Adapter
W4wj at aol.com
W4wj at aol.com
Fri Jul 11 01:00:26 EDT 2014
TNX AGN Chuck!!
73
Don
W4WJ
In a message dated 7/10/2014 6:15:44 P.M. Central Daylight Time,
cfharris at erols.com writes:
Err, that is TEI-14949 AD1W
The "4" got eaten somehow.
-Chuck Harris
W4wj at aol.com wrote:
> TNX for that information Chuck!!
>
> 73
> Don
> W4WJ
>
>
>
> In a message dated 7/10/2014 5:29:28 P.M. Central Daylight Time,
> cfharris at erols.com writes:
>
> Be warned, that Trompeter makes at least two varieties.
> The one you want has the thicker center pin that extends
> to within 1/8 inch of the end of the shield. The incorrect
> connector has a thinner center pin that only extends to
> about 1/4 inch of the end of the shield.
>
> The family number of both the right and the wrong connector
> is the same: TEI-14949
>
> The part that specifies the pin is AD1 for the wrong connector,
> and AD1W for the right connector...
>
> So the full part number of the connector you desire is:
>
> TEI-1949 AD1W
>
> These are Western Electric (eg. telco) connectors, not the
> more common video patch panel connectors.
>
> -Chuck Harris
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts
mailing list