[time-nuts] Beaglebone NTP server
henry at pericynthion.org
Thu Mar 27 13:32:59 EDT 2014
Thanks for all the hints everyone. Lots to try!
On Thu, Mar 27, 2014 at 2:41 AM, Iain Young <iain at g7iii.net> wrote:
> On 26/03/14 23:18, Brian Lloyd wrote:
>> Well, yeah. I figured that I would run the 1pps from my T-bolt to a GPIO
>> line with appropriate clamping to 3.3V.
>> But if anyone has done this before and run into anything of note, that
>> would be nice to know ahead of time.
> Can I suggest you consider FreeBSD ? You can use the TIMER4-7 input pins
> as PPS input for a better PPS. See the following URL for details:
> If I recall correctly, the patch is in the FreeBSD 10 snapshots for the
> Beaglebone, so you don't need to apply it, but you will need to enable
> PPS and ensure one of the four TIMER pins is set to input in the DTS
> and recompile.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> and follow the instructions there.
More information about the time-nuts