[time-nuts] Lucent KS-24361, HP/Symmetricom Z3809A, Z3810A, Z3811A, Z3812...
GandalfG8 at aol.com
GandalfG8 at aol.com
Sun Nov 2 14:15:04 EST 2014
Hi Gotz
That's great stuff, thank you, I'll try that later.
At this rate we'll soon be finding ways of doing this without any wiring
whatsoever, perhaps we could start with just standing it upside down in a
dark corner on the night of the full moon:-)
Regards
Nigel
GM8PZR
In a message dated 02/11/2014 17:58:12 GMT Standard Time, goetz at g-romahn.de
writes:
Am 02.11.2014 15:08, :
> Ooh err, whoops, and oh dear !!
>
> Arthur, I've only just had a chance to look at your latest photos, and
> unless I've really got my wires crossed, if you'll pardon the
expression:-),
> your links on J5 are not shown on pins 2, 10, 12, and 15, but on pins
4, 6,
> 11, and 13.
>
> As far as I'm aware the numbering from the front of that connector as
shown
> starts in the top right hand corner and every row is numbered right to
> left.
> That's certainly how mine are numbered anyway, and I wired them
> accordingly, and it worked, so where the heck does that leave us now?:-)
>
--------------------------
thanks Nigel for detecting this glitch. I removed all jumpers now and
tested some reasonable new/old combinations resulting in very simple
scheme:
it seems to be sufficient to connect pin2 and pin3 to pin8 (ground).
Numbering as provided by Nigel and markings on my 15 pin-plug.
Götz
More information about the time-nuts
mailing list