wb4gcs at wb4gcs.org
Sun Nov 30 13:23:49 EST 2014
SO, I just connected my third LTE-Lite unit.
By the time the software drivers were installed, and I selected U-center
to the new COMM port, it had a fix. Even with the survey LED still
I looked at the GoogleEarth view, and the fix is within six feet of
where the antenna really is. IMPRESSIVE.
BTW, the 10 MHz unit I ran for a couple of days showed a fix on
GoogleEarth within less than a foot of the antenna location.
On 11/28/2014 4:23 PM, Jim Sanford wrote:
> After running my 20 MHz LTE-Lite for a week or so, I shut it down and
> connected one of the 10 MHz units.
> The LEDs appear to be responding (survey still in progress) as per the
> quick start guide.
> Windows installed a new comm port and driver. (COMM6, with FTDI
> driver) The COMM5 port which was the 20 MHz unit is gone.
> U-center has selected COMM6 and is autobaud at 38000, but is showing
> my nothing except blank screens and a red NO FIX. Have I missed
> something? Or will it not report anything until a lock is achieved??
> wb4gcs at amsat.org
> This email has been checked for viruses by Avast antivirus software.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> and follow the instructions there.
This email has been checked for viruses by Avast antivirus software.
More information about the time-nuts