[time-nuts] 5370 processor boards available

Pete Lancashire pete at petelancashire.com
Wed Oct 8 11:15:48 EDT 2014

I plan on removing the rear panel and making appropriate size holes on a

for USB connectors something like

I will be using a shielded connector, same with the RJ45 connector

only using L-Com's site as a reference, in no way promoting them.

In some of the industrial work I've done, I have used this type of
connector/housing http://www.te.com/catalog/feat/en/c/20122

If you don't care about stuff radiating from your USB and Ethernet
antennas, on the E just search "panel mount (USB,ethernet)"


On Wed, Oct 8, 2014 at 7:00 AM, Chuck Harris <cfharris at erols.com> wrote:

> I'll introduce another angle to the discussion:
> How have others handled bringing the USB or Ethernet
> interface outside of their 5370?  There aren't exactly any
> extra holes in the back panel to run the cables through.
> Is removing the HPIB connector "the way"?
> Is anyone making a replacement panel that has a USB
> and an RJ connector mounted?
> I don't like leaving the lids off of my test equipment.
> -Chuck Harris
> Magnus Danielson wrote:
>> Hi Chuck,
>> The benefit is that you can use Ethernet straight into the 5370, you can
>> get much
>> higher sampling rates and well, we can have fun hacking up more
>> functionalities into
>> the 5370 native support if we like to.
>> Cheers,
>> Magnus
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/
> mailman/listinfo/time-nuts
> and follow the instructions there.

More information about the time-nuts mailing list