[time-nuts] LTE Lite time error
keith.loiselle at gmail.com
Mon Jan 26 19:41:47 EST 2015
Skytraq has also confirmed the issue and is working on a firmware update.
Updating the Skytraq firmware on the LTE-Lite Eval Board requires the unit
be returned to Jackson Labs for reprogramming. We will update the Skytraq
firmware on units at no charge if units are returned to us. Please contact
us off list to make arrangements for returns.
Also, the ROM firmware in the Skytraq does not exhibit this issue, so
selecting the ROM boot with a jumper between pins 1 and 2 of J3 is a
work-around. When making the J3 connection, be sure to remove power to the
board to avoid corrupting the flash. The LTE-Lite will operate in a mobile
mode without sawtooth correction when the Skytraq is booted from ROM.
On Mon, Jan 26, 2015 at 10:43 AM, Keith Loiselle <keith.loiselle at gmail.com>
> We have confirmed this issue with the Skytraq firmware on the LTE-Lite and
> are working with Skytraq to obtain a firmware update. I will post again
> when a firmware update is available.
> On Sun, Jan 25, 2015 at 5:47 PM, Bill Beam <wbeam at gci.net> wrote:
>> Odd indeed. My LTE-lite is one second late, appears to have already
>> added the pending leap second.
>> I can compare with four other GPS timeing receivers using time pulse on
>> DCD line. The NMEA data
>> reports in error. I am awaiting reply from JL. This is not good for an
>> eBay sniper....
>> Bill, NL7F
>> On Sun, 25 Jan 2015 12:12:55 -0800, Tom Van Baak wrote:
>> >Hi Paul,
>> >Odd, my LTE-Lite appears spot on. Let's take this off-list and see
>> what's going on.
>> >If anyone else has been logging SkyTraq NMEA or binary from the LTE-Lite
>> let us know.
>> Bill Beam
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> and follow the instructions there.
More information about the time-nuts