[time-nuts] KD2BD WWVB receiver/decoder in QEX

Alan Melia alan.melia at btinternet.com
Sun Nov 22 17:16:00 EST 2015

Hi Bob I have just realised that MSF may work diffently??  The Anthorn 
signal is monitored by NPL at Teddington, West of London and frequency 
off-sets twice a day are published in parts in 10^12 on their 
web-site.....involving  lot of averaging I think.  They do not recommend 
using the signal after dark.

You certainly could predict roughly the the skywave phase change during the 
day and the variation as the sun angle changes on the path over the year. It 
gets more difficult if there are flares or geomagnetic storms. If two 
independent stations at slightly different distances collect information it 
could be corrected even more accurately.

The same ionospheric problem occurs of course with Loran, and the now closed 
Decca system..


----- Original Message ----- 
From: "Bob Camp" <kb8tq at n1k.org>
To: "Nick Sayer" <nsayer at kfu.com>; "Discussion of precise time and frequency 
measurement" <time-nuts at febo.com>
Sent: Sunday, November 22, 2015 7:34 PM
Subject: Re: [time-nuts] KD2BD WWVB receiver/decoder in QEX

> Hi
> The most basic gotcha with WWVB is that propagation can (and does) shift 
> the
> carrier more than a full cycle over the course of a day. That’s at 60 KHz, 
> so one
> cycle is a lot (as in 16.666 ppm). Even at one second with a not so great 
> receiver
> and a poor antenna, GPS should give you ~0.01 ppm. Right up front, you 
> have a bit of a problem.
> (Yes I’m mixing measurements in that comparison, but the point is still 
> valid).
> What I keep wondering is - There is no big mystery about the WWVB 
> transmitter's
> location. You likely know your own location as well. Part of demodulating 
> the data
> gives you day of the year. From that you can figure out some of the basics 
> of the
> propagation effects (sunrise is at X:XX sunset is at … etc). You also 
> could grab stuff
> like weather data fairly easily (no idea if that actually helps). If you 
> fit out the basic
> propagation impacts, WWVB could get a lot better. At the very least, you 
> would know
> when to ignore the signal.
> So yes, you could do better today than they could back in the good old 
> days in terms of
> the propagation coarse effects.
> Unfortunately, there also is data on 24 hour comparisons of WWVB carrier 
> (same time of
> day, one day apart). If you pick your time right (noon or midnight), the 
> variable propagation
> can be reduced quite a bit. Based on that data, you are doing well at 100 
> ppt over
> 24 hours. Might the new modulation help that by 10X? ..maybe.  GPS over a 
> 24 hour
> period should be giving you something in the 0.1 to 0.01 ppt range (same 
> sort of pick a likely
> stable ionosphere time slot and compare).
> Does that make a WWVB device un-interesting? Not by any means. If you 
> stretch out the
> time, both systems get down into the “I have nothing else that good” 
> range. Checking one
> against the other is indeed an interesting thing to do. You just need a 
> *lot* of time to do it.
> Bob
>> On Nov 22, 2015, at 12:41 PM, Nick Sayer via time-nuts 
>> <time-nuts at febo.com> wrote:
>>> On Nov 22, 2015, at 7:47 AM, paul swed <paulswedb at gmail.com> wrote:
>>> As mentioned a nice answer to the wwvb modulation change.
>>> I looked up the parts and it seems that they have gone into the NOS 
>>> state.
>>> Though you can get some from digikey and such especially in the SOIC
>>> package. Also the VCO isn't available.
>>> It appears that the Chinese sight has the lmc6484 and LM387n at 
>>> reasonable
>>> prices for small quantities. Most likely will order from there.
>>> Have not checked out the PIC chip yet.
>>> The 74HCXX are common and reasonable.
>> That’s kind of a shame. I’m sure a redesign with modern SMD parts could 
>> be accomplished.
>> The big question is how the stability of a wwvb disciplined oscillator 
>> would compare to a GPS disciplined one (all other things being equal). 
>> Well, it’s a big question for me, since I have no idea, but I imagine 
>> simply asking here will give an immediate answer. :)
>> I’d have to guess that the PLL would behave better given a 60 kHz 
>> reference rather than a 1 Hz one. But how stable is that 60 kHz reference 
>> after going through, what, a thousand miles of ionosphere or so?
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to 
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to 
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there. 

More information about the time-nuts mailing list