[time-nuts] Z3805 service information ?

[Bob Benward]

Can you communicate over RS232?  Are you using the Z38xx software?  What
does it say?

Bob

>>> -----Original Message-----
>>> From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of Mark
>>> Spencer
>>> Sent: Tuesday, September 01, 2015 12:54 PM
>>> To: time-nuts at febo.com
>>> Subject: [time-nuts] Z3805 service information ?
>>> 
>>> Hi, I realize this is a long shot but I'm curious if anyone has ever
come across
>>> any form of a service manual (or insight into a power on self test
routine) for
>>> the Z3805 gpsdo ?
>>> 
>>> One of mine is not working properly after being power cycled.   It works
well
>>> enough to blink the status lights on the front panel hence my request
for info
>>> about a possible power on self test routine.
>>> 
>>> I'll likely start by confirming the power supply voltages using another
working
>>> unit as a guide and then swap parts with another working unit but
thought I
>>> would look for service information first.
>>> 
>>> Thanks in advance for any help.
>>> 
>>> With the exception of two ocxo's that have a dedicated battery backup
>>> system all my time nuts gear, computers, freezers, etc was power cycled
>>> during a two day power outage after a wind storm while I was on
vacation.   I
>>> have a nice generator that sat un used in my garage (:
>>> 
>>> Mark Spencer
>>> VE7AFZ
>>> 
>>> _______________________________________________
>>> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>> and follow the instructions there.