[time-nuts] Working with SMT parts.
bob91343 at yahoo.com
Thu Aug 11 13:24:38 EDT 2016
What are the important parameters regarding purchase of a stereo microscope? I see some on ebay for around $50; are those good?
On Thursday, August 11, 2016 10:00 AM, Didier Juges <shalimr9 at gmail.com> wrote:
I concur. I have been using ExpressPCB extensively over the last 2 years
with great satisfaction now that it is possible to get Gerber files from
I typically use the mini board pro service (3 bare boards, 2 sided with
solder mask and silk screen) for prototypes and then buy the Gerbers to
have production quantities done overseas.
The boards are of high quality and the service is very fast at a very
The only gotcha with regard to Gerber files is that you can only buy
Gerbers for boards that you have actually bought from them, so the process
is to buy the prototypes, then if you are happy with those, buy the Gerbers
for that design.
On Tue, Aug 9, 2016 at 3:06 PM, Brooke Clarke <brooke at pacific.net> wrote:
> I've had good luck using any of the the ExpressPCB services that include
> solder mask with surface mount parts where the pitch is 0.05" (half normal
> DIP) and hand soldering (requires stereo microscope).
> http://www.prc68.com/I/BTSG.shtml (battery top signal generator)
> http://www.prc68.com/I/SMT.shtml <http://www.prc68.com/I/SMT.shtml>
> Have Fun,
> Brooke Clarke
> The lesser of evils is still evil.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/m
> and follow the instructions there.
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts