[time-nuts] Subject: Re: Working with SMT parts (Bob Albert)
bob91343 at yahoo.com
Thu Aug 18 15:41:45 EDT 2016
Well I have found some Chinese sources of 42 - 50 grams on ebay for around $3. Is this the right stuff? The brand is Mechanics.
On Thursday, August 18, 2016 12:11 PM, Bob Albert <bob91343 at yahoo.com> wrote:
So where do you get this expired paste? I have tried a few searches but no luck.
On Thursday, August 18, 2016 12:00 PM, Chuck Harris <cfharris at erols.com> wrote:
I have had similar experience with well expired paste.
I just don't worry about it.
The issue is the solder is ground to such a fine powder that
it has a huge surface area to oxidize. As long as you keep
the air off, and refrigerate the paste, it seems to go forever.
Oh, and I only use tin/lead paste, not the RoHS stuff.
Steve Wiseman wrote:
> On 18 August 2016 at 07:07, Bob Albert via time-nuts <time-nuts at febo.com> wrote:
>> I didn't use the liquid solder because I didn't have any and it doesn't keep very long.
> That's not really the case. It may change consistency so that it
> behaves a little differently and fouls up automated stencilling
> machines (which are the most finicky devices on the planet), but with
> a human in the loop, you can expect most of a decade unless you let
> it dry out or do something daft.
> I'm still happily using stuff with a 2007 expiry code, in (big)
> plastic syringes. Still behaves fine. (and the benefit of the
> stirred-in flux and excellent wetting does make paste a joy to use
> compared to even good solder wire).
> 'Expired' solder paste can be a bargain.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts