[time-nuts] Lady Heather Version 5 is now available

Arnold Tibus arnold.tibus at gmx.de
Sun Dec 11 17:14:50 EST 2016


Many thanks Brian!

I found it!
In Windows 7 (10?) this file must be copied into the system32 directory
of windows in order to be read and enable the instructions to be executed.

73
Arnold DK2WT


Am 11.12.2016 um 21:51 schrieb Bryan _:
> Arnold:
>
>
> It seems during the install at least on Windows 10 that it does not give the full permissions to the files. I just gave the folder the correct permissions after the isntall. If you go to help, at the bottom of the screen  it tells you where during the install another copy of the heather.cfg was installed. You should be able to read/write this copy. At least that was my experience during installing.
>
>
>
>
> -=Bryan=-
>
>
> ________________________________
> From: time-nuts <time-nuts-bounces at febo.com> on behalf of Arnold Tibus <arnold.tibus at gmx.de>
> Sent: December 11, 2016 10:39 AM
> To: time-nuts at febo.com
> Subject: Re: [time-nuts] Lady Heather Version 5 is now available
>
> Hello Mark,
>
> many thanks for your immense and invaluable work!
>
> I am using the trimble thunderbold together with LH version 3 all the
> last years with success, I like your program very much.
> I downloaded and installed today the version 5, but I have some problems
> because it looks like my windows 7 does
> not get access to the heather.cfg file, what do I wrong? Anybody has an
> idea how to do it right?
>
> Many thanks
>
> Arnold, DK2WT
>
>
>
> Am 11.12.2016 um 01:25 schrieb Mark Sims:
>> The heather.cfg file has a com port setting (/1u) and a /rxa (receiver auto-detect) command line option setting which gets processed before the settings on the command line.
>>
>> Try editing heather.cfg file and change the /1u command to /0
>>
>> ---------------------
>>
>>>  I started it under Windows XP SP3, with the option /rxx as I currently have my TBolt
>> connected to another PC, but what I got was an error message saying :
>>
>> Error exit 10002: Can't GetCommState()
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> time-nuts Info Page - American Febo Enterprises<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
> www.febo.com
> time-nuts is a low volume, high SNR list for the discussion of precise time and frequency measurement and related topics. To see the collection of prior postings to ...
>
>
>
>> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> time-nuts Info Page - American Febo Enterprises<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts>
> www.febo.com
> time-nuts is a low volume, high SNR list for the discussion of precise time and frequency measurement and related topics. To see the collection of prior postings to ...
>
>
>
> and follow the instructions there.
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.




More information about the time-nuts mailing list