[time-nuts] OT stuffing boards: was GPS interface/prototyping board
Bob Stewart
bob at evoria.net
Thu Jun 23 15:28:15 EDT 2016
One more related question before this topic dies, if you don't mind. What about the other side of building: stuffing the boards. My GPSDOs have about 120 parts per board, plus some custom work on the SMA connectors. Is there a service out there that will populate boards with SMT components for small orders at a reasonable price? Small is 10 boards.
Bob - AE6RV
-----------------------------------------------------------------------------------
GFS GPSDO list:
groups.yahoo.com/neo/groups/GFS-GPSDOs/info
--------------------------------------------
On Wed, 6/22/16, Clint Jay <cjaysharp at gmail.com> wrote:
Subject: Re: [time-nuts] RS232 / GPS interface/prototyping board
To: "Discussion of precise time and frequency measurement" <time-nuts at febo.com>, "Nick Sayer" <nsayer at kfu.com>
Date: Wednesday, June 22, 2016, 6:06 PM
Life is so much easier
now, dirtypcb is a great service, I have a pile of
boards here from them which are far greater
quality than anything I could
hope to
produce at home or even in the lab I used to have.
They're also
better quality than any of
the local board houses I used in the past.
Having said that, I did hand
manufacture fifty single sided boards from
photo laminate to completed product in one
weekend using a Dremel drill
press for
somewhere around four thousand holes and hand soldering
every
component so it was definitely
possible
On 23 Jun 2016 00:01, "Nick
Sayer via time-nuts" <time-nuts at febo.com>
wrote:
More information about the time-nuts
mailing list