[time-nuts] Fw: 5065

[Pete Lancashire]

Anywhere there is a concentration of HAMs you should be able to find the
connector. I found the one for my 5061 at a ham swapmeet and found another
for a friend by asking a few hams who were the 'collector' type.

On Thu, Mar 17, 2016 at 10:54 AM, paul swed <paulswedb at gmail.com> wrote:

> Both good answers the old connect to the bottom, and my favorite get the
> connector. I used both methods. Connected to the bottom, fixed the unit,
> purchased the real connector. It was something like $18 or $30.
> Search time nuts because 2 years ago someone figured out the model numbers
> and source. Something like greybar as the supplier. The same connector also
> works on the HP cesiums. I pulled the connector off but unfortunately no
> useful numbers.
> It can be strapped for either voltage and as suggested get the manual from
> Artek.
> Regards
> Paul
> WB8TSL
>
> On Thu, Mar 17, 2016 at 12:35 PM, Poul-Henning Kamp <phk at phk.freebsd.dk>
> wrote:
>
> > --------
> > In message <C66D906890F94E07B26A6139637C04AE at pc52>, "Tom Van Baak"
> writes:
> >
> > With respect to 120/240VAC, the 5065 I have is jumpered for 5065, the
> > manual
> > (available from Artek) has the details.
> >
> > --
> > Poul-Henning Kamp       | UNIX since Zilog Zeus 3.20
> > phk at FreeBSD.ORG         | TCP/IP since RFC 956
> > FreeBSD committer       | BSD since 4.3-tahoe
> > Never attribute to malice what can adequately be explained by
> incompetence.
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> > To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> >
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>