[time-nuts] TAPR Oncore M12+ kit

Jerry Hancock jerry at hanler.com
Fri Apr 28 15:19:30 EDT 2017


Is there a way I can help with this project?  If I had the specs to look at, maybe I would be able to run off a bunch of plates.  If we could batch them up I would do them for the cost of shipping.

Does anyone have a dimensioned print, picture, cad drawing of the plates?



> On Apr 28, 2017, at 11:33 AM, jimlux <jimlux at earthlink.net> wrote:
> 
> On 4/28/17 10:09 AM, Bob kb8tq wrote:
>> Hi
>> 
>> If you go with the PCB approach, the nice thing is getting stuff like
>> the slot for the D connector done at the PCB fab. That way you
>> have something that drops right in and works. The downside is that
>> not every pcb house is happy doing that sort of “CNC work”.  I
>> have absolutely no idea why. They all have to run some sort of gear
>> to cut the boards apart. Cutting slots or weird holes with it is pretty
>> trivial.
>> 
>> Bob
> 
> what about Front Panel Express?  They're in the whole business of small run panels.  Not the cheapest place around, and you use their design tool, but I've been happy with the quality of their work.
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.



More information about the time-nuts mailing list