[time-nuts] TAPR Oncore M12+ kit
kb8tq at n1k.org
Fri Apr 28 16:13:55 EDT 2017
The dimensions, including the holes that need to be CNC’d into the plates are
attached an earlier message in this thread. The main link is:
The dimensions are at the bottom of:
The one that is the bigger issue is the “front” that has the D hole and a connector
for a normal 9 pin serial connector.
> On Apr 28, 2017, at 3:19 PM, Jerry Hancock <jerry at hanler.com> wrote:
> Is there a way I can help with this project? If I had the specs to look at, maybe I would be able to run off a bunch of plates. If we could batch them up I would do them for the cost of shipping.
> Does anyone have a dimensioned print, picture, cad drawing of the plates?
>> On Apr 28, 2017, at 11:33 AM, jimlux <jimlux at earthlink.net> wrote:
>> On 4/28/17 10:09 AM, Bob kb8tq wrote:
>>> If you go with the PCB approach, the nice thing is getting stuff like
>>> the slot for the D connector done at the PCB fab. That way you
>>> have something that drops right in and works. The downside is that
>>> not every pcb house is happy doing that sort of “CNC work”. I
>>> have absolutely no idea why. They all have to run some sort of gear
>>> to cut the boards apart. Cutting slots or weird holes with it is pretty
>> what about Front Panel Express? They're in the whole business of small run panels. Not the cheapest place around, and you use their design tool, but I've been happy with the quality of their work.
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts