[time-nuts] Deaf Z3801
bownes at gmail.com
Thu Nov 16 11:24:00 EST 2017
When I do this, I get the E-222 error indicating 'Data out of range'.
Tried several formats, trailing';', etc.
Here's what I get:
scpi > :GPS:INIT:DATE 2017,11,16
E-222> :GPS:INIT:DATE 17,11,16
E-222> :GPS:INIT:DATE 17,01,01
E-222> :GPS:INIT:DATE 2017,01,01
E-222> :GPS:INIT:DATE 2017,01,01;
E-222> :GPS:INIT:DATE 17,01,01;
Even tried a :SYSTEM:PRESET, whic interestingly enough, does not reset the
On Wed, Nov 15, 2017 at 8:49 AM, John Franke <jmfranke at cox.net> wrote:
> Shut off power to the GPS receiver
> Disconnect the GPS antenna downlead
> Reapply power to the GPS receiver
> Enter *:GPS:INIT:DATE 2017,01,01* (The only space is between DATE and
> Reconnect the GPS antenna downlead and wait
> On November 14, 2017 at 10:43 PM Bob Bownes <bownes at gmail.com> wrote:
> I put my 3801 back in service the day before yesterday, or tried to. It’s
> been on the shelf for about a year (off).
> I powered it up, and while it sees a few sats, it will not acquire any.
> Changing to a known good antenna (off the NTP server) makes no difference.
> Anyone seen the behavior before? The location data is good, but the
> time/date are way out.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/
> and follow the instructions there.
More information about the time-nuts