[time-nuts] Need Oncore connector info.
pete at petelancashire.com
Tue Feb 27 13:00:46 EST 2018
Excellent summery !!!!
On Tue, Feb 27, 2018 at 9:13 AM, Majdi S. Abbas <msa at latt.net> wrote:
> On Tue, Feb 27, 2018 at 08:01:12AM -0600, John Green wrote:
> > I need the part number of the connector that the Motorola Oncore series
> > receiver plugs into. Does anyone have that info at hand?
> Which Oncore? The M12+ and the earlier ones are different.
> Early receivers used a standard dual row 0.1" (2.54mm) pitch for
> power and data, and an MCX antenna connector.
> Later receivers used a 1.27mm pitch (0.050") 2x5pin header
> with (from memory) the same pinout.
> You should be able to search on pitch, row and pin count on
> your distributors website and find a variety of manufacturers.
> There's nothing special about these connectors.
> And while you're ordering them, Trimble went to a 2x4 pin
> 2mm / 0.079" connector. If you're going to play with a Resolution T
> SMT module or something along those lines down the road, you might
> as well order that up, too.
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/
> and follow the instructions there.
More information about the time-nuts