[volt-nuts] First post

[Ulrich Bangert]

Dick,

> I hope to begin using a Prologix USB>GPIB converter, yet to 
> be purchased, for data gathering and control, via Ulrich's EasyGPIB

Should you need any assistance, don't hesitate to contact me directly!

Best regards
Ulrich

> -----Ursprungliche Nachricht-----
> Von: volt-nuts-bounces at febo.com 
> [mailto:volt-nuts-bounces at febo.com] Im Auftrag von Dick Moore
> Gesendet: Mittwoch, 20. Januar 2010 22:19
> An: volt-nuts at febo.com
> Betreff: [volt-nuts] First post
> 
> 
> Hi all. This is my first post to volt-nuts. Glad to find this 
> list; got here from time-nuts. My little lab (on the western 
> shore of Puget Sound) has a couple of Fluke 732A DC Refs, an 
> HP 3458A (no options), a Datron 1082 DMM, a Fluke 5440B 
> Direct Volts Calibrator, a couple of Fluke 510A AC Standards 
> (400Hz and 40kHz), and a variety of resistance standards, 
> other bridges, meters, etc.
> 
> I hope to make time to dig around in the archives. For now, 
> I'm interested in any experience you all have with the 
> long-term drift of the Fluke/Motorola reference modules used 
> in the 732s, the 5440 and the 510s (as well as the 850x 
> series of meters). I'm also wondering about the stability of 
> the 510s in particular, which seem very drift prone and 
> highly temperature sensitive -- comments and any practical 
> mods welcome. Has anyone subbed in an LTZ1000A in any of these units?
> 
> I hope to begin using a Prologix USB>GPIB converter, yet to 
> be purchased, for data gathering and control, via Ulrich's EasyGPIB
> 
> Best,
> Dick Moore
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to 
> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.