[volt-nuts] Generating a square waveform 2Gbps

AlBundy buzonazo+voltnuts at gmail.com
Sat May 1 15:05:02 UTC 2010

On Sun, Apr 18, 2010 at 5:35 PM, Rob Klein <rob.klein at XXXXXXX> wrote:
>   Hi,
>   As someone who considers anything above 100MHz as Black Magic, I'm
>   afraid I can't really help you.
>   Most Volt-Nuts are bound to be more DC oriented anyway, so I would
>   advise you to post your query
>   on [1]the Time-Nuts list. Lots of folks with multi-GHz experience
>   there.

Hi Rob,

First, soory the delay in the answer. Thank you very much for your help.

I didn't know Volt-Nuts was restricted to low-frequency topics.

I have read my own question, and I think it is not very well composed
for the Time-Nuts list level. I will try to recompose my question and
will post it in Time-Nuts.

>   Do you actually require those ten signals to be individually
>   controllable/configurable,
No, i don't have this requirement. I can use the same generator for the
ten devices (directly, or with 10 buffers if the generator is not capable
of deliver the signal).

My problem is I would prefer the cheapest solution, with integrated circuits;
I can not afford to buy (or to rent) ten commercial laboratory generators.

>  or would some sort
>   of distribution amplifier, driven from your generator, do?
It would be an interesting solution. The problem is that I can not find LVDS
integrated-circuit drivers in Gbps range.

Best Regards

More information about the volt-nuts mailing list