[volt-nuts] The HP 8903A Audio Analyzer

Artekmedia henderson47 at embarqmail.com
Tue Sep 18 10:09:46 UTC 2012


Roy

You will likely have better luck asking over on the HP_Agilent_Equipment 
Group.

http://tech.groups.yahoo.com/group/hp_agilent_equipment/

If you dont find a free one we have a professional quality scan for a 
very modest amount

http://artekmanuals.com/manuals/hp-manuals/

Contact me direct at manuals at artekmanuals.com for samples and more 
information

Dave




On 9/18/2012 3:24 AM, Roy Phillips wrote:
> I have a faulty HP8903A. Despite the excellent Agilent manual archive, and other sources that I am aware of – I cannot find any source for the Service Manual – can anybody help ?  The unit starts up and displays all digits as with the normal “self check”, but stops dead at this stage. All voltages would appear to be normal. It has a sequence of four yellow LED’s on the Processor PCB, which are active – but what is the ‘normal’ state for these. This is not an easy unit to access without the vertical series of PCB’s without extenders – any help would be much appreciated.
> Thanks
> Roy
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.

-- 
Dave Henderson
Manuals at ArtekManuals.com
www.Artekmanuals.com
PO Box 175
Welch,MN 55089
651-269-4265




More information about the volt-nuts mailing list