[volt-nuts] vSolartron7081 rom reading
David C. Partridge
david.partridge at perdrix.co.uk
Sun Jan 13 16:36:52 UTC 2013
Actually, I believe that the MONITOR command will allow you look at storage anywhere within the address space of either of the processors, see pages 8.1 through 8.5 of the service manual. So it should be possible to READ the ROMs this way if both processors are working and communicating.
However it would be pretty slow, and as all the ROMs are socketed, it's not a big deal to just remove them and read them in a programmer.
Note that I haven't tried this.
From: volt-nuts-bounces at febo.com [mailto:volt-nuts-bounces at febo.com] On Behalf Of Bill Ezell
Sent: 13 January 2013 13:28
To: volt-nuts at febo.com
Subject: Re: [volt-nuts] vSolartron7081 rom reading
Going from memory, no, you have to pull the roms and read them. At least, that's what a few of us in the group have done.
You can access ram and nvram, though.
They said 'Windows or better'
so I used Linux.
volt-nuts mailing list -- volt-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
and follow the instructions there.
More information about the volt-nuts