[volt-nuts] Seek full Manual - EDC DC millivolt calibrator E100C

J. L. Trantham jltran at att.net
Mon Mar 18 20:27:28 EDT 2013


Glad it worked.  You might want to post it on some site or the group list or
both, in order to help others that will follow.


-----Original Message-----
From: volt-nuts-bounces at febo.com [mailto:volt-nuts-bounces at febo.com] On
Behalf Of cfo
Sent: Monday, March 18, 2013 3:21 PM
To: volt-nuts at febo.com
Subject: Re: [volt-nuts] Seek full Manual - EDC DC millivolt calibrator

On Sun, 17 Mar 2013 20:16:29 -0500, J. L. Trantham wrote:

> CFO,
> Several months ago, I bought an EDC CR103 DC Current and Voltage 
> Standard and ran into the same problem.
> I emailed Kron-Hite, asking if the manual was available, if so, how 
> much, etc.  The reply was an emailed .PDF complete manual, schematics 
> and everything.
> You might try asking them if they still have the manual available, etc.
> Couldn't hurt.
> Good luck.
> Joe

Hi Joe 

Thank you for the tip.
I followed your advice , and emailed Kron-Hite service , asking if it would
be possible to get a copy of the service manual.

And i just got a very plesant response from their Service Department Manager
, with the complete E100C service manual attached. and a best of luck with
the restoration project.

Thumbs up Krohn-Hite , and thank you for the excellent service.

CFO - Denmark

volt-nuts mailing list -- volt-nuts at febo.com To unsubscribe, go to
and follow the instructions there.

More information about the volt-nuts mailing list