[volt-nuts] Datron 1082
randyevans2688 at gmail.com
Wed Apr 23 00:08:50 EDT 2014
That does look like the battery in my 1082. I don't see any markings on the
battery in my unit but I can't see the back side until I remove it.
I assume the original was 3.6 VDC also but I'm not sure how to verify that.
Thanks for the help.
On Tue, Apr 22, 2014 at 7:07 PM, T. Micallef <tmicallef at gmail.com> wrote:
> Randy Evans <randyevans2688 at ...> writes:
> > The schematic of the Datron 1071 DMM seems to be very similar to the
> > 1082 but I'm sure there are differences. Unfortunately, I have not been
> > able to locate the 1082 Service Manual with the parts lists and
> > The 1071 manual does have a similar or identical battery but I can't
> > the part number in the 1071 parts list. Does anyone know the part
> > of the memory battery in the 1082 or 1071, or the characteristics; e.g.,
> > voltage and A-H rating?
> > Thanks,
> > Randy Evans AE6YG
> > On Mon, Apr 21, 2014 at 8:32 PM, Tom Knox <actast at ...> wrote:
> I popped the top off of my mothballed 1071 and it looks like a 1/2AA
> based on physical measurements. It looks like the one in the following link
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to
> and follow the instructions there.
More information about the volt-nuts