[volt-nuts] Datron 1082
randyevans2688 at gmail.com
Wed Apr 23 00:25:51 EDT 2014
I just took out the battery and it is a Tenergy 3.6 VDC 1200mAH ER14250
with tabs welded on.
On Tue, Apr 22, 2014 at 9:08 PM, Randy Evans <randyevans2688 at gmail.com>wrote:
> That does look like the battery in my 1082. I don't see any markings on
> the battery in my unit but I can't see the back side until I remove it.
> I assume the original was 3.6 VDC also but I'm not sure how to verify
> Thanks for the help.
> On Tue, Apr 22, 2014 at 7:07 PM, T. Micallef <tmicallef at gmail.com> wrote:
>> Randy Evans <randyevans2688 at ...> writes:
>> > The schematic of the Datron 1071 DMM seems to be very similar to the
>> > 1082 but I'm sure there are differences. Unfortunately, I have not been
>> > able to locate the 1082 Service Manual with the parts lists and
>> > The 1071 manual does have a similar or identical battery but I can't
>> > the part number in the 1071 parts list. Does anyone know the part
>> > of the memory battery in the 1082 or 1071, or the characteristics; e.g.,
>> > voltage and A-H rating?
>> > Thanks,
>> > Randy Evans AE6YG
>> > On Mon, Apr 21, 2014 at 8:32 PM, Tom Knox <actast at ...> wrote:
>> I popped the top off of my mothballed 1071 and it looks like a 1/2AA
>> based on physical measurements. It looks like the one in the following
>> volt-nuts mailing list -- volt-nuts at febo.com
>> To unsubscribe, go to
>> and follow the instructions there.
More information about the volt-nuts