[volt-nuts] 732A rear panel battery connector

Randy Evans randyevans2688 at gmail.com
Mon Oct 20 13:22:02 EDT 2014


Charles,

Thanks for the update.  I was able to get a cable plug set from Todd
Micallef.

Randy

On Mon, Oct 20, 2014 at 6:23 AM, Charles Steinmetz <csteinmetz at yandex.com>
wrote:

> Randy wrote:
>
>  Does anyone have a spare connector plug for the 732A external battery
>> *** ( I saw several in discussions but I'm not sure which is the best part
>> number to use).
>>
>
> Back in March, I reported on my friend's adventure to get the contact
> bodies and contacts from Fluke.  The problem was, the designers of the 732A
> used male pin contacts in the panel receptacles and female socket contacts
> in the cable plugs -- backwards from the way they are used by every other
> user of those connectors (including the present Fluke users -- they are
> used in certain medical equipment).  Fluke understood the problem and told
> him they planned to create a new part number with the right components for
> the 732A, and would let him know what it was.
>
> Having heard nothing since then, I asked my friend if he had heard back
> from Fluke.  He had not, so he called his Fluke contacts and was told that
> Fluke had decided not to catalog the plugs for the 732A.  So, Kensington
> Electronics is probably the best source.
>
> Best regards,
>
> Charles
>
>
>
>
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/
> mailman/listinfo/volt-nuts
> and follow the instructions there.
>


More information about the volt-nuts mailing list