[volt-nuts] Solartron 7081 .. what to look for

Steve - Home steve-krull at cox.net
Thu Mar 10 22:19:12 EST 2016


Congrats! The 7081 is a good meter, although very slow when making 8.5 digit measurements. The key is only necessary for calibrating the instrument and can be bypassed with a clip lead to go into cal mode. I have the part number for the matching input connector somewhere but I'm traveling until March 18 so I can't lay my hands on it. If no one finds it before then I will have a look when I get home.


> On Mar 10, 2016, at 9:53 PM, Pete Lancashire <pete at petelancashire.com> wrote:
> I just won a Solartron 7081, hopefully did not pay too much.
> I have 30 days ROR.
> Other then the usual things in any used piece of equipment, obvious damage,
> Perfume of Allen Bradly, error messages What are some of the thing I should
> be looking for.
> The bad news is I do not have a cable or key. Is the key needed to take the
> cover off ?
> Someone in the past said the had the key type and a drawing or scan of the
> key
> are you still here ?
> I could coble up a cable to do the basic E/I/R checks or is there someone
> in or near Portland Oregon that has one ?
> Regards
> -pete
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.

More information about the volt-nuts mailing list