[time-nuts] PCB costs and suggestions for suppliers

[Harry Hindriks]

I used Olimex for some boards, but since they are in European Community the
prices increased.
2 Years ago US$ 99,- for 320x200mm, now 120 Euro plus VAT.
But when you need a lot of different small boards it is a good option
(Panel).

Harry Hindriks


-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Poul-Henning Kamp
Sent: dinsdag 8 juli 2008 19:54
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] PCB costs and suggestions for suppliers

In message <DED35E77793D4058A633B386AA4B7291 at APOLLO>, "David C. Partridge"
writ
es:

>I'm looking to get a PCB made up for my frequency divider circuit.   I'm
>based in the UK.

I've used olimex.com for a couple of two-layer boards and I'm happy with
the results.

One advantage for me was that they took EagleCad files directly, so that
I did't have to worry about inverted gerbers and all that.

Poul-Henning


-- 
Poul-Henning Kamp       | UNIX since Zilog Zeus 3.20
phk at FreeBSD.ORG         | TCP/IP since RFC 956
FreeBSD committer       | BSD since 4.3-tahoe    
Never attribute to malice what can adequately be explained by incompetence.

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.