[time-nuts] Intro and Driver Request

John Allen john at pcsupportsolutions.com
Thu May 12 21:34:04 EDT 2016


FWIW, The Win 2000 driver will work on Win XP.

John, K1AE

-----Original Message-----
From: time-nuts [mailto:time-nuts-bounces at febo.com] On Behalf Of Jason T
Sent: Thursday, May 12, 2016 8:27 PM
To: time-nuts at febo.com
Subject: [time-nuts] Intro and Driver Request

Hello Time-Nuts - I've ended up here by way of the ham radio,
electronics and classic computing hobbies, which I'd bet is a common
trail to follow for time-standard collectors.  I don't have any exotic
equipment at the moment but I've run across GPS and rubidium-based
test equipment online and at hamfests without knowing much about them,
other than they looked cool and technical :)

Recently I came upon a Datum ISA card, the BC620at, along with the
627at kit, which is a Trimble "smart antenna" that attaches to the
card:

http://www.gigatest.net/datum/bc620at.pdf

Not that I need any more projects, but I may as well try to make it do
its thing; however I am lacking the necessary drivers for the ISA
card.  I found (and imaged) the one disk that came with it but that
turned out to be the Windows (98, NT, 2000) SDK.  I believe there
should be an MS-DOS driver as well.

Does anyone have or has anyone used one of these cards?  Any advice,
in addition to tips on the driver/software, is much appreciated.

Thanks much

-j

-- 
silent700.blogspot.com
Retrocomputing and collecting in the Chicago area:
http://chiclassiccomp.org
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.



More information about the time-nuts mailing list